Radial Cement Bond logs allow the customer to easily identify any channels in the cement and identify any fast formations that exist in the well. All data is recorded in a single pass therefore saving valuable time.
Our 42 mm outside diameter radial bond tool allows us to accurately log multiple size casings from 60.3 mm to 177 mm with a single pass. This ability will save critical time in deeper multiple size casing wells where knowing the cement bond quality at the liner top is critical. This smaller OD tool also allows us to run a Radial Cement Bond Log on any casing below the tubing bottom in the well without pulling the tubing.
A Compensated Neutron log will give a porosity curve that includes a near and far space neutron count that is useful to pick out possible production zones as well as potential gas sources in surface casing vent leaks
Neutron logging will help pick out potential formations and is also useful for correlation if the Gamma Ray curve shows little or no character
Noise and Temperature logging are used in conjunction with a CNL/Radial Bond log to identify gas sources in casing vent leaks. A temperature log that is ran before and after injecting fluid can be also used to determine any fluid migration in an injection well that is required for the EUB.
Gamma Ray Casing/Tubing Collar Logging is the most commonly used for depth control in a cased hole.
